PLX omnicem
Powder tile adhesive
Flexible all-round powder tile adhesive.
Characteristic product properties
- Universal application, good initial adhesion.
- Very suitable for natural stone.
- Suitable for some critical surfaces.
- Layer thickness: up to 15 mm.
- Can be applied to walls and floors.
- Indoor and outdoor.
- Classified in compliance with EN 12004: C2TE. S1.
Applications
For laying all ceramic floor and wall tiles, including those with a lower porosity than 0.2 %, composite cement tiles and (glass) mosaic tiles. PLX omnicem is especially suitable for laying calibrated natural stone. The mortar can be used without any problems inside and outside. Can be used as an adhesive on stable surfaces as well as more deformable surfaces. Bathrooms, damp areas, shops, industrial spaces and exterior tiling are just a few examples.
Getting started with PLX omnicem
Certificates and documents
Download the documents available from this specific product here.
Additional documents
Can't find the right certificate?
Contact us
Let us help you out
Which glue comb is best to use?
The choice of the right teeth depends on a number of factors;
Tip: By regularly removing a tile from the adhesive bed, you can see what the adhesive contact surface looks like and whether this is sufficient.
- the type of tile adhesive (paste or powder),
- the 'buttering-floating' method is used, and
- the application (wall or floor),
- the flatness of the substrate and the flatness of the tile.
For large format tiles >60x60 cm. It is in any case important that the surface is flat. If you need to eliminate large level differences in the surface, you can first level the surface, or you can use a thick-bed mortar with a round-toothed adhesive comb.
Read some guidelines regarding glue combs on the next page.
How long does the mixed glue last in the tub?
This is the pot life, which is usually between 2 and 4 hours. Attention! With fast-hardening adhesives this is only 20-30 minutes.
When can I walk on the tiles?
This can be done (carefully) after at least 24 hours. With fast-setting adhesives, this can be done after just a few hours.