Go to homepage
Contact

Need advice? We will be happy to advise you.

Contact

Need advice? We will be happy to advise you.

Contact

Need advice? We will be happy to advise you.

Contact

Need advice? We will be happy to advise you.

Contact

FLM250 R

Additional products

Universal fast curing repair mortar for surfaces subject to heavy loads.

Product characteristics

  • Repair, filling and levelling mortar.
  • For the rapid repair and filling of uneven areas prior to levelling.
  • Excellent adhesion on almost any stone surface.
  • Stable both on horizontal and sloping surfaces.
  • Excellent adhesion on metallic formwork.
  • Low risk of fissures or hairline cracks appearing at plastic or hardened stage.
  • Able to withstand alternating periods of frost/thawing.
  • Very high adhesion and compressive strength.
  • Layer thickness: up to 40 mm.
  • Can be applied to floors and walls.
  • Suitable for indoor and outdoor use.

Applications

For the rapid filling, levelling and repair of cracks, holes and breaks in floors. Can be used to “remove” uneven areas. Due to its fast setting time, a levelling mortar and self-levelling screed can already be applied after approx. 25 minutes.

USP11 USP08 USP15_2 GEB02_25-4-75-5-25_USP

Getting started with FLM250 R

Certificates and documents

Download the documents available from this specific product here.

Additional documents

Can't find the right certificate?

Contact us

Most frequently combined

 products

Skip product gallery

Cross Sellings EN

FP30
FP30
Quick-drying primer.
Skip product gallery
W100 R omnimix
W100 R omnimix
Multi-purpose levelling mortar for walls, fast-hardening, mechanical application.
90W LIGHT omnimix
90W LIGHT omnimix
Lightweight levelling mortar for mechanical application on walls.
FP30
FP30
Quick-drying primer.

Let us help you out

What is industrial leveling?

Leveling industrial and heavily loaded floors is a profession in itself. An old floor is refurbished so that it can be used as new. In addition, it is a frequently used application that is used to repair new concrete floors that have been damaged by rain. Or new concrete floors that must meet a higher flatness class than can be achieved with “normal” poured concrete. Think of AMR floors.

What temperature should the subfloor be during leveling?

During processing it is necessary to keep the temperature of the subfloor, space and material between 15 °C and 25 °C. In addition, the relative 65% of the lager must be before, during and a few days after maceration!

What determines whether the leveling compound is suitable for the chosen final finish?

The combination of flatness, smoothness and hardness of the top layer determines whether a soft or hard covering can be placed, such as tiles or PVC. A rougher top layer is much less important for a finish with tiles, while for a floor finish with, for example, PVC and marmoleum, an extremely smooth top layer is necessary. The flow rate may differ per grade or type of leveling compound. But with proper use, all our leveling compounds will become perfectly flat.

Heb je hulp nodig?

Onze experts helpen je graag verder!