B2 MULTI GREEN omnibind
Pre-treatment plaster
Deep primer green.
Characteristic product properties
- Universal deep primer.
- Can be used on a wide range of substrates.
- Closed substrates, smooth prefab concrete (curves).
- Light green in color so you can easily see where you left off.
- Sprayer, roller, block applicator or brush.
- Walls and ceilings.
- Interior and exterior.
Applications
Adhesion-promoting and absorption-reducing deep primer for use to pre-treat cement, lime and plaster layers. Also used to reduce absorption and improve adhesion. Is particularly well suited for ceiling applications. B2 MULTI omnibind is also used as a pre-treatment under tilework (walls and floors). Apply with a suitable sprayer, roller, block applicator or brush.
Getting started with B2 MULTI GREEN omnibind
Certificates and documents
Download the documents available from this specific product here.
Can't find the right certificate?
Contact us
Skip product gallery
Cross Sellings EN
90GR omnimix
Fast setting levelling mortar for walls subject to heavy loads. mechanical application.
Let us help you out
What different types of glue are there?
There are 3 types of glue, each with their own characteristic properties. They are all standardized within the European standard EN 12004.
The specific properties of a product say nothing about what you can do with it. Each manufacturer determines this individually in the technical data sheet. So always follow the regulations via our advice module.
- Cement-based powder tile adhesive (C)
- Dispersion glue (D)
- Reaction glue (R)
Read more about the different types of tile adhesive on the next page.
Which glue comb is best to use?
The choice of the right teeth depends on a number of factors;
Tip: By regularly removing a tile from the adhesive bed, you can see what the adhesive contact surface looks like and whether this is sufficient.
- the type of tile adhesive (paste or powder),
- the 'buttering-floating' method is used, and
- the application (wall or floor),
- the flatness of the substrate and the flatness of the tile.
For large format tiles >60x60 cm. It is in any case important that the surface is flat. If you need to eliminate large level differences in the surface, you can first level the surface, or you can use a thick-bed mortar with a round-toothed adhesive comb.
Read some guidelines regarding glue combs on the next page.