RS omniflex
Ready-mixed tile adhesives
Applications
For laying all ceramic wall tiles, natural stone and brick slips. This highly efficient and ready-to-use tile adhesive is very suitable for laying a wide range of tiles. Can be used on all interior walls. Can be used for laying tiles on all stable surfaces and some surfaces that are subject to limited deformation. Examples of applications: damp places, bathrooms, kitchens, toilets.
Getting started with RS omniflex
Certificates and documents
Download the documents available from this specific product here.
Additional documents
Can't find the right certificate?
Contact us
Let us help you out
Which glue comb is best to use?
The choice of the right teeth depends on a number of factors;
Tip: By regularly removing a tile from the adhesive bed, you can see what the adhesive contact surface looks like and whether this is sufficient.
- the type of tile adhesive (paste or powder),
- the 'buttering-floating' method is used, and
- the application (wall or floor),
- the flatness of the substrate and the flatness of the tile.
For large format tiles >60x60 cm. It is in any case important that the surface is flat. If you need to eliminate large level differences in the surface, you can first level the surface, or you can use a thick-bed mortar with a round-toothed adhesive comb.
Read some guidelines regarding glue combs on the next page.
How long does the mixed glue last in the tub?
This is the pot life, which is usually between 2 and 4 hours. Attention! With fast-hardening adhesives this is only 20-30 minutes.
When can I walk on the tiles?
This can be done (carefully) after at least 24 hours. With fast-setting adhesives, this can be done after just a few hours.