GM omnifix
Construction adhesives
Dunbed-lijmmortel voor dunne voegen.
Characteristic product properties
- Mortar en grout in one, for joint thicknesses from 4 - 10 mm.
- Suitable for bricks and concrete blocks.
- 2 types: A (highly porous bricks), B (moderately porous and penetrable bricks).
- Interior and exterior.
Applications
Suitable for thin-layer masonry work using all possible types of clay bricks and concrete blocks for joint thicknesses from 4 to 10 mm. Can be applied with trowel, grouting bag or pump. Because a matching color can be selected and because of the fact that the (thinner) joint is set back the mortar is very inconspicuous.The mortar can be used in all standard situations as well in work with open head joint as closed head joints. There are two types of mortar, depending on the water absorption of the used brick en the application methode you have to choose: type A for absorbent bricks, with our without pump an B for low- or non-absorbent bricks and concrete blocks, only to use without pump.
External certifications
- CE conformity according to system 2+, BÜV NW, Düsseldorfer Straße 50, D-47051, Duisburg with number 0778, certificate 0778-CPR-8.554-2/1 998-2
| INITIAL RATE OF WATER ABSORPTION (IRA) | MORTAR TYPE | ||
| IRA class | Type facade brick | Initial water absorption (kg/m2 min) | GM |
| IRA1 | Very low absorption | IW ≤ 0,5 | B |
| IRA2 | Moderate absorption | 0,5 < IW ≤ 1,5 | A |
| IRA3 | Normal absorption | 1,5 < IW ≤ 4,0 | A |
| IRA4 | Very high absorption | 4,0 < IW | A |
IRA: Determined in accordance with EN 772-11
The weather conditions can affect the suction power.
Getting started with GM omnifix
Certificates and documents
Download the documents available from this specific product here.